Overhaul

REMOVE OR DISCONNECT
1. Bleeder valve.
2. Boots.
3. Pistons.
4. Seals.
5. Spring. Inspect Cylinder bore for scoring and corrosion. Spring assembly for signs of discoloration due to heat. Replace if necessary. Clean Inside the cylinder bore with crocus cloth. If the bore is still scored, replace the cylinder. Cylinder with clean brake fluid.

INSTALL OR CONNECT
1. Lubricate the seals and cylinder bore with clean brake fluid.
2. Spring.
3. Seals.
4. Pistons.
5. Boots.
6. Bleeder valve. Tighten Bleeder valve to 13 Nm (110 inch lbs.).
7. Links.