Cylinder Head Bolts - Revised Tightening Specifications
File In Section: 06 - Engine/Propulsion SystemBulletin No.: 02-06-01-011
Date: March, 2002
SERVICE MANUAL UPDATE
Subject:
Revised Fastener Tightening Specification for Cylinder Head Replacement
Models:
1996 Cadillac Concours
1996-97.Cadillac DeVille, Eldorado, Seville
with 4.6L Engine (VINs Y, 9 - RPOs LD8, L37)
This bulletin is being issued to revise a fastener tightening specification in the Cylinder Head Replacement procedure in the Engine Mechanical - 4.0L, 4.6L sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information. The information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
When installing the three M6 bolts, tighten to 12 Nm (106 lb in).
Disclaimer