Stoplamp/BTSI Switch (Lower) Replacement

Brake Pedal Mounting:

NOTE: When installing the brake pedal switches it is very important that the brake pedal remain in the full up or at rest position when installing the brake pedal switches, or damage to the brake system and/or switch misadjustment may occur.

REMOVE OR DISCONNECT
1. I/P sound insulators, as needed for access.
2. Lower switch, twist switch counter clockwise and remove.
3. Lower switch electrical connectors.

INSTALL OR CONNECT
1. Lower switch electrical connectors.
2. Lower switch into lower retainer. With switch connector facing the 6 o'clock position, slide the switch into the retainer until the switch plunger is fully depressed into the switch barrel. Twist switch clockwise until travel has stopped. The switch connector will face the 8 o'clock position when the switch is in the fully locked position.

NOTE: When installing the brake pedal switches it is very important that the brake pedal remain in the full up or at rest position when installing the brake pedal switches, or damage to the brake system and/or switch misadjustment may occur.