Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS
1. Check Engine Compartment Fuse[Relay Center IGN 1 Fuse and FOG/DRL Fuse by visual inspection.
2. Check Trunk Compartment Fuse Block RT PARK Fuse by visual inspection.
3. Check that Front Foglamps Relay "B" is securely mounted in the Engine Compartment Micro Relay Center.
4. Check that Rear Foglamps Relay "C" is securely mounted in the Trunk Compartment #1 Micro Relay Center.
5. Check that grounds G100, G201, G205 and G402 are clean and tight.
6. Before component replacement, check that system connections are clean and tight.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.