Install or Connect

CAUTION: When you are carrying an undeployed inflator module:
^ Do not carry the inflator module by the wires or connector on the inflator module.
^ Make sure the bag opening points away from you.
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

Install or Connect
1. The inflatable restraint I/P module and pigtail to UP.
2. The four fasteners securing inflator to I/P.
3. The fastener behind trap door in rear of glove compartment retaining inflator module to bracket.

Tighten
^ Fasteners to 2 N.m (18 lb. in.).

4. The I/P upper trim pad, refer to I/P Upper Trim Panel in Instrument Panel, Console and Gauges.

Enable the Frontal SIR system, refer to Enabling the Frontal SIR System.


Tighten
^ Fasteners to 2 N.m (18 lb. in.).