Height Sensor and Bracket Replacement

REMOVE OR DISCONNECT
1. Raise vehicle.
2. Height sensor connector (E) from vehicle harness connector.
3. Link (9) from ball stud (10) and height sensor (11) actuating arm.
4. Two nuts (12) and height sensor (11) from bracket (13).
5. Two bolts (14) and bracket (13) from vehicle.

INSTALL OR CONNECT
1. Bracket (13) on vehicle with two bolts (14).
^ Tighten two bolts to 6 Nm (53 inch lbs.).
2. Height sensor (11) on bracket (13) with two nuts (11).
^ Tighten two nuts to 6 Nm (53 inch lbs.).
3. Link (9) to ball stud (10) and height sensor (11) actuating arm.
4. Height sensor connector (E) to vehicle harness connector.
5. Lower vehicle.
^ Adjust Height Sensor.