Rear

REAR HUB AND/OR BEARINGS

REMOVE OR DISCONNECT
1. Raise vehicle.
2. Wheel and tire.
3. Caliper and suspend. Refer to BRAKES.
4. Rotor.
5. Hub and bearing assembly.

INSTALL OR CONNECT
1. Hub and bearing assembly.
^ Tighten hub mounting bolts to 70 Nm (52 lb ft).
2. Rotor.
3. Caliper and new caliper bracket mounting bolts. Refer to BRAKES.
^ Tighten caliper mounting bracket bolts to 113 Nm (83 lb ft).
^ Parking brake cable bracket bolt to 43 Nm (32 lb ft).
4. Wheel and tire.
5. Lower vehicle.