Accumulator Housing Disassemble and Inspect

1. Remove the following parts:
- The two snap rings (349) from the top side of the accumulator housing (944)
- The 1-2 accumulator assembly (968-970, 973)
- The 3-4 accumulator assembly (975-977, 950)
2. Inspect the accumulator pistons for scratches or damage. Inspect the accumulator piston pins for scoring.





3. Remove the following parts:
- The five 8-mm cover bolts (966)
- The accumulator housing cover (965)
- The gasket (964).
- The forward accumulator assembly (960-963)
- The reverse accumulator assembly (946-949)
4. Inspect the accumulator pistons (946, 960) and the accumulator piston pins (948, 962) for scoring or damage.





5. Inspect the accumulator housing (944) for damage or scoring in the bores.
6. Inspect all fluid passages for debris.