Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 1997 >> Seville SLS V8-4.6L VIN Y >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Service and Repair >> Front Suspension
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Suspension













^ Tools Required:
- J 28733-Front Hub Spindle Remover
- J 34657-A Hub Seal Installer
- Or Equivalents

REMOVE OR DISCONNECT
1. Raise vehicle and support frame with jackstands.
2. Tire and wheel assembly.
3. Insert drift punch into rotor and remove hub nut and washer.
4. Caliper and support. Refer to BRAKES.
5. Rotor.
6. Separate drive axle from hub.
7. Hub and bearing retaining bolts.
8. ABS wheel speed sensor connector from hub and bearing assembly.

INSTALL OR CONNECT
1. ABS wheel speed sensor connector to hub and bearing assembly.
2. Hub and bearing assembly to knuckle.
^ Tighten hub and bearing retaining bolts to 95 Nm (70 lb ft).
3. Rotor.
4. Caliper and support using new caliper mounting bolts. Refer to BRAKES.
5. Install drift punch into rotor and partially tighten hub nut and washer.
6. Tire and wheel assembly.
^ Tighten wheel nuts to 140 Nm (100 lb ft).
7. Lower vehicle.
^ Tighten hub nut to 145 Nm (110 lb ft).
pro multis · About Operation CHARM