Windshield Washer Reservoir: Service and Repair
Washer Solvent Container:

Remove or Disconnect
1. Air filter housing.
2. Reposition powertrain control module.
3. Screw (7).
4. Left front tire.
5. Wheelhouse panel extension.
6. Two electrical connectors.
7. Washer hose (8).
8. Two nuts (9 and 10) and washer solvent container (11).
9. Washer pump (12) from container (11).
10. Solvent level sensor (13) from container (11).
Install or Connect
NOTICE: Refer to Service Precautions.
1. Solvent level sensor (13) on container (11).
2. Washer pump (12) on container (11).
3. Container (11) with two nuts (10 and 9).
4. Screw (7).
Tighten
^ Screw and two nuts to 5 N.m (44 lb. in.).
5. Electrical connectors and washer hose (8).
6. Wheelhouse panel extension.
7. Left front tire.
8. Reposition powertrain control module.
9. Air filter housing.